хабање

хабање

Damage resulting from the removal of materials from surfaces in relative motion. Wear is generally described as:

Abrasive: Removal of materials from surfaces in relative motion by a cutting or abrasive action of a hard particle, which is usually a contaminant. : Adhesive: Removal of materials from surfaces in relative motion as a result of surface contact. Galling and scuffing are the extreme cases. : Corrosive: Removal of materials by chemical action.

0 0

Cải thiện

Thêm hình ảnh

Loại từ: noun
Từ đồng nghĩa:
Blossary:
Ngành nghề/Lĩnh vực: Machine tools
Category: Bearings
Company: Timken
Sản phẩm:
Viết tắt-Từ viết tắt:

Thêm vào Bảng chú giải thuật ngữ của tôi

Ngôn ngữ khác:

Thuật ngữ liên quan

отпорност на хабање

Machine tools; Bearings

The ability of a rubber compound to resist mechanical wear.

отпорност на хабање

Textiles; Manufactured fibers

The ability of a fiber or fabric to withstand surface wear and rubbing.

заштитни омот

Machine tools; Bearings

A metal cap that fits over the outer end of the hub to keep grease in and dirt out of the bearing assembly.

толеранција

Machine tools; Bearings

1) The range between two limiting sizes as a means of specifying the degree of accuracy. 2) The amount a given bearing dimension may vary from specifications. 3) The difference ...

топлотно ширења

Machine tools; Bearings

The expansion caused by the increase in temperature. This may be linear or volumetric.

статична тачке

Machine tools; Bearings

The section of the helix seal lip incorporating the contact line.

штит

Machine tools; Bearings

A metal formed washer attached to the outer ring and set so it rides close to, but not contacting, the inner ring, to retain lubricant and prevent contamination.

оксидација

Machine tools; Bearings

This occurs when oxygen attacks petroleum fluids. The process is accelerated by heat, light, metal catalysts and the presence of water, acids, or solid contaminants. It leads to ...